欢迎访问365备用官方网站! 在线讯息 | 联系365备用 | 关于365备用
服务热线:13525600754
产品分类Products
联系365备用contact us
365备用 联系人:赵先生 手机:13525600754 Q Q:96401236@qq.com 网址:www.pt716.com 地址:常州市武进区港口大桥工业园
如何安全操作钣金加工设备
2018-12-26 19:43:45   

1、施工开始前的操作者,365备用得先清理一下现场,如果你有杂物,你应该及时把它们清理干净。2、检查工作过程中使用的工具,你情况还好吗?,它能正确使用吗?,以及这种联系是否牢固,以此类推。

1. Operators should clean up the site before starting construction. If there are any sundries, they should clean up in time. 2. Check the tools used in the process of operation, whether they are intact, whether they can be used normally, and whether the connection is firm.

3、使用机械和设备时,就像一台机床、焊接机等,检查机器和设备是否正常并处于良好状态,不管地面是好是坏。所有的测试都没问题,,以便能够按照规定的要求和程序启动和使用。

3. In the use of machinery and equipment, such as machine tools, welding machines, to check whether the machinery and equipment is normal and intact, grounding is good. Only after all inspections are done, can they be launched and used in accordance with the specified requirements and procedures.

4、焊接作业用焊条,应该是干的,避免防潮。还,焊接电流应适当。

4, welding electrodes used in welding operations should be dry and moisture proof should be avoided. And the welding current should be suitable.

5、人员进行焊接工作,你应该戴上面具,穿戴防护设备。

5. Personnel should wear masks and wear protective clothing when doing welding work.

6、如果你想用氧气瓶,、如果你有乙炔瓶,,然后氧气瓶和乙炔钢瓶应该远离火源,避免暴露在阳光和撞击下。

6. If oxygen cylinders and acetylene bottles are to be used, then oxygen cylinders and acetylene bottles should be kept away from the fire and avoid exposure to sunlight and impact.

7、定期检查汽缸、注意头部和气管等,如有任何问题,应及时处理。

7, regular inspection of gas cylinders, head and trachea, etc., if there are problems should be dealt with in a timely manner.

8、运输氧气瓶和乙炔气瓶必须使用特殊的手推车,不要拖在地上。

8, when handling oxygen cylinders and acetylene cylinders, special handling cars must be used and must not be dragged on the ground.

9、氧焊点火前,先打开乙炔,然后打开氧气,熄火时关闭乙炔阀,在回火时,应迅速固定胶管,先关闭乙炔阀,然后关闭氧气阀。

9. Before oxygen welding ignition, open acetylene gas first and then oxygen gas, shut off acetylene gas valve when extinguishing. When tempering occurs, the glue pipe should be quickly clamped, and then the acetylene gas valve should be closed.